813022-STAN813022-STAN
NEW
Manufacturer Part No.
813022
Schukat Part No.
813022-STAN
Manufacturer
Enter your company's part number here. Your part number will be referenced on your receipts, such as the order confirmation, invoice or delivery note.
Enter your personal project number here to assign the item to a project. Your part project number will be referenced on your receipts, such as the order confirmation, invoice or delivery note.

20 Pcs. in stock

Planned delivery time
Ø 3 Weeks
Life Cycle Status
The life cycle indicates which market phase the item is in. We distinguish between: • Active (green) • NRND = Not Recommended for New Designs (yellow) • LTB = Last Time Buy (yellow) • EOL = End of Life (red)
Active
Available (from stock)
Replacement / Follow-up View entire series
Data Sheet
ECAD Model
Downloads

Prices

Manufacturer bundle 1 Pcs.
Manufacturer's packaging unit (Mfr. PU) means the smallest original packaging unit of the manufacturer.
Price per 1 Pcs.

Quantity and Options

(at least 1 or multiple of 1)
All prices net plus VAT. We do not deliver to private customers.

Fact Sheet

Leaded
false
Alloy
Sn96,5Ag3,0Cu0,5|Sn99,3Cu0,7|Sn99Cu0,7Ag0,3
Flux type (IPC-J-STD-004)
REM1
Flux content
2.5 %
Halogen content
1.1 %
Melting point
227 °C
RoHS-Conform

Specifications

Close all

General

Manufacturer
  • Stannol
Product Family
  • Kristall 611
Type
  • Soldering Wire
Product group
  • R5129
Leaded
Alloy
  • Sn96,5Ag3,0Cu0,5|Sn99,3Cu0,7|Sn99Cu0,7Ag0,3
Packaging (g)
  • 500 g
Flux type (IPC-J-STD-004)
  • REM1
Flux content
  • 2.5 %
Halogen content
  • 1.1 %
Features
  • • according to J-STD-004C
    • low flux spitting
    • good wetting properties
    • transparent residues
    • electrical safe residues
    • No-Clean

Operating conditions

Melting point
  • 227 °C

Electrical features

Surface Insulation Resistance
  • 10⁸ Ohm Ohm

Safety/Certifications

Directions
  • The Stannol Kristall 600 series solder wires are suitable for both manual and machine soldering of electrical and electronic components. The flux residues do not need to be removed. Solder tip temperatures should be set to 120/140K above the melting point of the used alloy, i.e. when using TC Sn99.3Cu0.7 with a melting point of 227°C you can solder with ~340-360°C at the tip, if thermal management is appropriate for the specific application.

Documents

FB_Kristall611_DE.pdf
SDS___Kristall-611-SN100C___Germany_German.pdf
Stannol_Hauptkatalog.pdf