Home
Login
Cart
HomeProductsTools & ConsumablesElectro ChemicalsHumiSeal®165427

165427

Stannol Protective Lacquer  165427 365 ml

Manufacturer Part No.
165427
Schukat Part No.
1B73EPA
Manufacturer
Stannol
Enter your company's part number here. Your part number will be referenced on your receipts, such as the order confirmation, invoice or delivery note.
Enter your personal project number here to assign the item to a project. Your part project number will be referenced on your receipts, such as the order confirmation, invoice or delivery note.

Item no longer available!

Planned delivery time
---
Life Cycle Status
The life cycle indicates which market phase the item is in. We distinguish between: • Active (green) • NRND = Not Recommended for New Designs (yellow) • LTB = Last Time Buy (yellow) • EOL = End of Life (red)
EOL 01.04.2026
Discontinued by manufacturer without replacement
Replacement / Follow-up View entire series
Data Sheet
Open PDF
ECAD Model
Downloads

Prices

Manufacturer bundle 12 Pcs.
Manufacturer's packaging unit (Mfr. PU) means the smallest original packaging unit of the manufacturer.
Price per 1 Pcs.

Quantity and Options

(at least 12 or multiple of 12)
All prices net plus VAT. We do not deliver to private customers.

Fact Sheet

UN Number (Dangerous Goods)
1263 - Colour
Type
Protective Lacquer 
Shelf Life
24 Monate
RoHS-Conform

Specifications

Close all

General

Manufacturer
  • Stannol
Type
  • Protective Lacquer 
Series
  • HumiSeal®
Product group
  • R2268
Application

  • Protect and insulate

Packaging (ml)
  • 365 ml

Operating conditions

Storage

  • HumiSeal® 1B73EPA should be stored away from excessive heat or cold, in tightly closed containers. HumiSeal® products may be stored at temperatures of 0 to 35°C. Prior to use, allow the product to equilibrate for 24 hours at a room temperature of 18 to 32°C.

Shelf Life
  • 24 Monate

Safety/Certifications

Directions

  • Spraying:
    HumiSeal® 1B73EPA can be sprayed using conventional spraying equipment. Spraying should be done in an environment with adequate ventilation so that the vapour and mist are carried away from the operator. The addition of HumiSeal® Thinner 600 is necessary to ensure a uniform spray pattern resulting in pinhole-free film.The amount of thinner and spray pressure will depend on the specific type of spray equipment used and operator technique. The recommended ratio of HumiSeal® 1B73EPA to HumiSeal® Thinner 600 is 1:1 by volume; however the ratio may need to be adjusted to obtain a uniform coating.

    Brushing:
    HumiSeal® 1B73EPA may be brushed with a small addition of HumiSeal® Thinner 600. Uniformity of the film depends on component density and operator's technique.

    Caution
    Application of HumiSeal® Conformal Coatings should be carried out in accordance with local and National Health and Safety regulations.
    The solvents in HumiSeal® Conformal Coatings are flammable. Material should not be used in presence of open flame or sparks. Use only in well-ventilated areas to avoid inhalation of vapours or spray. Avoid contact with skin and eyes.
    Consult SDS prior to use.

Hazardous Substances/Goods

UN Number (Dangerous Goods)
  • 1263 - Colour

Documents

HUMISEAL_1B73EPA_62000_BL0000___SDS_Germany_EU_English_HumiSeal_Europe_1B73EPA.pdf
Download (pdf, 845 KB)
HUMISEAL_1B73EPA_62000_BL0000___SDS_Germany_EU_English_HumiSeal_Europe_1B73EPA_1.pdf
Download (pdf, 845 KB)