Enter your company's part number here. Your part number will be referenced on your receipts, such as the order confirmation, invoice or delivery note.
Enter your personal project number here to assign the item to a project. Your part project number will be referenced on your receipts, such as the order confirmation, invoice or delivery note.
9 Pcs. in stock
Planned delivery time
Ø 1 Week
Life Cycle Status
The life cycle indicates which market phase the item is in. We distinguish between:
• Active (green)
• NRND = Not Recommended for New Designs (yellow)
• LTB = Last Time Buy (yellow)
• EOL = End of Life (red)
Manufacturer's packaging unit (Mfr. PU) means the smallest original packaging unit of the manufacturer.
Price per 1 Pcs.
Quantity and Options
(at least 1 or multiple of 1)
All prices net plus VAT. We do not deliver to private customers.
Fact Sheet
UN Number (Dangerous Goods)
1950 - Pressurised Gas Pack
Type
Corrosion Inhibitor
RoHS-Conform
Specifications
Close all
General
Manufacturer
CRC
Type
Corrosion Inhibitor
Series
KONTAKT 701
Product group
R2264
Application
Lubricate and protect
Packaging (ml)
200 ml
Features
- High-purity silicon and acid free contact grease on vaseline base - It is a fat-like, soft layer of Vaseline to the cable clamps, fittings, battery terminals and copper tracks is reliably protects against moisture and corrosion - Temperature range: -30...+80°C - Material compatibility: good with all metals and mineral oil resistant materials - Documents in 19 languages
Safety/Certifications
Directions
Using the extension tube, KONTAKT 701 as a spray can be dosed accurately. The aerosol can be used in an up-side-down position (360° valve), so hard to reach parts can also be treated. Shake can before use. KONTAKT 701 when used as a protective coating against corrosion, should be applied in relative thick layers. Screw and clamp contacts should be given a coating of approx. 1 mm. As a lubricant although, only a thin film is required. Many materials, including synthetics, tolerate KONTAKT 701 quite well. For series production runs however, a compatibility test should always be carried out. With most elastomers a slight swelling is not critical, provided precise dimentional stability is not required. KONTAKT 701 is unsuitable for example as a lubricant for polystyrene, polycarbonate and EPDM rubbers.Using the extension tube, KONTAKT 701 as a spray can be dosed accurately. The aerosol can be used in an up-side-down position (360° valve), so hard to reach parts can also be treated. Shake can before use. KONTAKT 701 when used as a protective coating against corrosion, should be applied in relative thick layers. Screw and clamp contacts should be given a coating of approx. 1 mm. As a lubricant although, only a thin film is required. Many materials, including synthetics, tolerate KONTAKT 701 quite well. For series production runs however, a compatibility test should always be carried out. With most elastomers a slight swelling is not critical, provided precise dimentional stability is not required. KONTAKT 701 is unsuitable for example as a lubricant for polystyrene, polycarbonate and EPDM rubbers.
Hazardous Substances/Goods
UN Number (Dangerous Goods)
1950 - Pressurised Gas Pack
Documents
KONTAKT 701-Belgium-English-1_3_pdf-BDS000571AE.pdf
